LC8700
System
Processor: Intel Atom Processor N450 1.66GHz, 667MHz FSB, 512KB 8-way L2 Cache
Memory: 128MB to 2.0GB DDR2 533/667 SODIMM
Hard Drive: Internal Compact Flash, 64 MB to greater than 32GB Optional internal IDE 2.5” PATA or SATA hard drive (160 GB up)
Primary Video (DB15): 1400 x 1050 pixels (SXGA+) max, 256MB max shared video memory
Secondary Video (DVI-I): Optional, 1280 x 1024 pixels (SXGA) max
Network Interface: 10/100/1000 Base-T Ethernet, Network boot capable
Keyboard/Mouse: PS/2
USB Port: 7 USB 2.0 ports
Serial Port: COM1 and COM2, optional COM3 and COM4 (side connector) optional +5V / +12V power at pin 9
Parallel Port: LPT1
Audio: Speaker-out and Mic-in, AC97 Audio CODEC (optional front connectors)
Expansion slot: Mini-PCIE socket
Electrical
Input: 100 to 240VAC
Input frequency: 47 to 63 Hz
Input current: < 1.5A @ 120VAC
Output: +12VDC / 5.0A
Ripple voltage: < 120mVp-p
Mechanical
Weight: 3.0lbs
Dimensions: 8.0”W x 6.3”D x 2.0”H
Housing: Die cast
Environmental
Operating Temperature: 5°C to 40°C
Relative humidity: 8 to 80%, non-condensing
Storage temperature: 0°C to 60°C
Relative humidity: 5 to 80%, non-condensing
Connectors
Video: DB15 and DVI-I connectors
Keyboard & Mouse: PS/2 mini-DIN6 female connectors
RS232: Standard DB9 male connectors
USB: Standard USB type-A connectors
Ethernet: RJ45 8 pin female connector
Audio: Speaker out/Mic in phone jacks
Parallel: Standard, DB25 female connector
DC power: Shielded snap lock mini-DIN with EMI/RFI suppression, 3-pin female connector
Retail hardened computers need to be reliable, as they often are used for mission critical applications and not placed in an office environment. Bematech’s LC8700 provides unparalleled reliability by being a fanless and ventless unit. It is an ideal computer for use in harsh environments with high levels of dust or oil or when fan noise is not desirable. For enhanced reliability, all of the computer components and connectors reside on one PC board. The LC8700’s single board computer limits the number of internal cables, a common source of loose connections and failures. A true no-moving-part operation is provided when compact flash is used for mass storage or boot-from-network configurations are employed.
Ultra Compact and Rugged
The LC8700 has a very compact form factor – only 2”H x 8”W x 6”D. Two mounting tabs enable these modules to be mounted almost anywhere – on a wall, ceiling, table top or under a counter. For minimum foot-print, the LC8700 can be mounted vertically. The computer is housed in a rugged die cast case for extra protection.
The LC8700 provides a very impressive compliment of modern and legacy I/O ports. Standard 4 serial, 7 USB 2.0, 1 VGA, 1 DVI-I (optional), 1 parallel, 1 Ethernet (10/100/1000 Mb/s), PS/2 keyboard and mouse, microphone and speaker ports are all available. Hence industrial applications that require serial or parallel interfaces are fully addressed. The LC8700 also uses Intel high performance processors, so it can run all Windows and Linux-based graphics and video applications. Whether your application runs on Windows 7, Windows XP, Windows XP embedded, POS Ready 2009, ( Windows CE and Linux upon request), your operating system needs are supported by the LC8700. This enables the unit to be used in a wide variety of applications – in a restaurant’s kitchen system, in a POS workstation, in an auto ID workstation, etc.